Painting the Exterior of Your Home

The first step in a high quality exterior paint, or any paint project, is to start with a clean surface. That means you have to wash under pressure. You probably need to rent a high pressure cleaner, that’s something you can do at any major equipment rental or hardware store. Depending on the height of your home, you will need an extension or ladder, you will need a ladder for pressure washer. (Or both) … You can rent an electric washing machine for about $ 100 a day. Stairs can be rented for $ 40 a week.
Once you have all this equipment, use the right technique to clean all the surfaces you plan to paint under pressure, leaving no traces from extreme water pressure. It is recommended to use a dilute mixture of bleach and sodium triphosphate to prevent mold growth and remove lime. People often ask: what is choke? It is a calcareous substance that adheres to your hands when you touch the unwashed parts of your home and is most commonly found in homes that have not been painted for some time. Below is a picture of a chalk in my hand. Chalk is always the color of the paint work, and it is the property of the paint that decomposes in the sun.
Repeat: One of the most important steps in painting is cleaning the work surface. Otherwise, the paint will not adhere to the dirty surface and will come off within a year. You can hire a professional painter or pressure washer contractor to wash your home, usually for less than $ 200. Visit:- https://www.schadeherstelproducten.nl/
Stairs and ceilings are always safe. It’s very easy for someone to slip and fall. If you’re under pressure, you don’t have to approach the surface of the water. Usually 8 meters away. Finally, it is very important to dry the surface completely and, in case of rain or high humidity, test the washed area for at least one day.
Once the surface of the paint has dried, you can start preparing the work surface to receive the paint. First, you need to have a calf. It is important to use only silicone latex sealant. It must contain latex and be “paintable” on the tube. If you only want one coat of paint, buy a color putty that matches the color of the paint, but if you want two coats of paint, a white putty is a good choice. It is usually cheaper per tube than color putty. Make sure that all gaps between the wood and the joint are tightly closed. Do not seal the wood with plaster.
The next step in preparing the surface of the paint is to scrape off the loose and defective paint, even if possible, even on bare wood. Next, you need to paint, glue, and tile the area you are standing in first, and then apply the primer to all the surfaces you plan to paint. The color of the primer should be chosen according to the color you want to paint (it is not always recommended to use white for dark colors). Make sure you cover everything except shrubs and plants in the garden. By placing the sails on shrubs and plants, you can kill them due to the weight of the sails and the heat trapped around the plants under the sails.
Configuration

Setup is the next part of the task, but you may have done it before you started the preparatory work. After choosing a paint color, measure the number of square feet you want to paint. After calculating the number of square feet to paint, divide that number by 300. This is about the number of liters of paint needed for the first coat.
It’s better to stay with the national brand of the paint store. One tip is not to go to the paint shop on the weekends. They are always packed with other DIYers on weekends. If you go at night, during the day, or on weekdays, they probably have more time for individual consultation. It’s usually best to ask the store manager. He is more experienced and can guide you in the right direction about what type of paint and primer you should get and you can help the color if you need it .. ..

Leave a comment

Your email address will not be published. Required fields are marked *